YI 2.7" Screen Full HD 1080P60 165 Wide Angle Dashboard Camera

The 3 Best Dashcams in 2019

What is Dashcams?

Yi DashCam

Yi DashCam. (Photo from Amazon)

A dashcam is an onboard camera that continuously records the view through a vehicle’s front windscreen and sometimes rear or other windows. Dashcams can provide video evidence in the event of a road accident. This is review of the 3 best Dashcams in 2019 with reasonable price and good quality.

#1. YI 2.7″ Screen Full HD 1080P60 165 Wide Angle Dashboard Camera

YI 2.7" Screen Full HD 1080P60 165 Wide Angle Dashboard Camera

YI 2.7″ Screen Full HD 1080P60 165 Wide Angle Dashboard Camera

Key Features:
• 165° Wide – angle Lens for a Full 3 – lane Coverage
• High Sensitivity Imaging and Night Vision
• ADAS (Advanced Driver Assistance System)
• H.264 Video and Emergency Recording
• 6G Lens + Infrared Filter: Capture Every Moment in Detail
• Built-in Wi-Fi: Single Touch Sharing
• Widescreen Preview

VIDEO

Yi Dash Cam

#2. Pruveeo F5 FHD 1080P Dash Cam

Pruveeo F5 FHD 1080P Dash Cam

Pruveeo F5 FHD 1080P Dash Cam

Specifications:

Pruveeo F5 FHD 1080P Dash Cam Spec

• Loop Recording: Support
• LCD Screen Size: 1.5 inches
• Video Resolution: Full HD 1080P
• Lens: 170 degrees full glass lens
• Language System: English
• Microphone / Speaker: Support
• Audio Recording: On / Off
• Date Time Mark: Support

VIDEO

Pruveeo F5 FHD 1080P Dash Cam

#3. Z-EDGE S3 Dual Dash Cam

Z-EDGE S3 Dual Dash Cam

Z-EDGE S3 Dual Dash Cam

Specifications:

Z-EDGE S3 Dual Dash Cam

• Dual Resolution: 1920x1080P 30FPS
• Front Only Resolution: 2560x1440P 30FPS
• Photo Resolution: 12-Megapixels
• Display Screen: 2.4” HD screen
• Field-of-View: 150-degrees
• Operating Temperature: 10°F to 140°F
• Storage Temperature: -5°F to 160°F
• G-Sensor: Built-in
• Battery: 470mAH Li-ion

Key Features:

Z-EDGE S3 Dual Dash Cam

• Superior Night Vision
• Optimized Viewing Angle
• Dual Super HD Recording
• Stealth By Design
• Expert Witness

Other Features:
• Parking Mode: Motion Detection
• Installation
• Pack Contents

DVD Shrink​

Top 3 Best Free DVD Ripper Programs

Ripping DVDs into your external hard drive or into your PC is a great help if you want to backup all your files into one memory that can be used for storage, this is done if you want to get rid of all the physical discs. The top three Best Free DVD Ripper Programs are the DVD Shrink, DVD Decrypter, and the BDlot DVD ISO Master. With the use of right DVD ripping software, your conversion would not be a complicated process.

#1. DVD Shrink

DVD Shrink​

DVD Shrink is a freeware for Microsoft Windows that has a transcoder program that contains a one-megabyte single executable file. It operates in two modes which are the Reauthor and Full Disk. Reauthor interface allows you to choose which DVD elements (Menus, Title, subtitles, audio tracks and Special Features) to remain in the shrunken file. While the Full Disk functionality is a backup copy that compresses the menu or some special features to make space for other DVD elements that you need to be included on the file.

DVD Shrink has the ability to take a 4.7 GB memory but it can only compress a memory that is less than 4.3GB. The struggle in using this ripper program is to carefully check the files that you can remove or compress to come up with a memory of 4.3 GB or less.

Pros:
• It can be downloaded conveniently that is free of charge.
• It has a fast program that has a straight forward interface for easy access.
• It has a fast copying speed that lets you choose whether full copying or customize parts copying.

Cons:
• You may need to have default burning software such as NERO if you would directly burn DVD for backup copies.
• The author has stopped developing it since 2005 that is why it does not support newer Microsoft windows.

#2. DVD Decrypter

DVD Decrypter

DVD Decrypter has the ability to rip DVDs and Blu-rays that can save the file into their original formats; nothing will be altered, changed or shrunk. This ripper program has the ability to remove the Content Scramble System, which is a restriction placed in some commercially produced video disc’s access.

It also allows you to rip specific files because of its straightforward interface. Some of its features are removing region codes and it supports multi-angle DVD movies for an excellent visual experience that lets you view in different angles. This ripper program can only copy 4.38GB of files. The downside of this ripper program is that it cannot copy data in DVDs protected by new systems such as XProtect.

Pros:
• The quality is preserved using this software.
• Its program and software are for long term use because until now it is still being maintained.

Cons:
• The interface of this software is a bit complicated that is why it may take some time for you to learn the in and out of this software.

#3. BDlot DVD ISO Master

BDlot DVD ISO Master

BDlot DVD ISO Master has the ability to save and burn regular and protected files into ISO which is a file that represents an entire CD or DVD. This ripping technology has the ability to successfully create an ISO file, backup protected files using its Unique Decrypting Technology and its Proofing Technology Guarantees timely and accurate data burning.

This ripping program can be able to run in any Windows operating systems because of its All-round burning technology without having an impact on your computers because you don’t need to install any other ripping tools.

Pros:
• It is an easy and highly streamlined way of copying DVD content.
• It has the ability to remove copy protections and restrictions.

Cons:
• It lacks in customizations features and it only accepts ISO formatted files.

Final Thoughts

The goal of ripping programs is to make your digital files accessible without relying on your discs that have a tendency to be scratched. With all the available ripping programs available you’ll just need to choose what works best for your lifestyle. You can get these ripper programs at a cheap price but some downloaders are free of charge.

** If you looking for converter from VHS to DVD, please check out this here Best VHS to DVD Converters.

Plastic and Alumide Materials 3D Printing

3D Printers and 3D Printing: Technologies, Processes, and Techniques

3D printing is known as additive manufacturing. This means the addition of thin layers between 16 to 180 microns or more to create an object. All 3D printing technologies perform similarly because these construct an object in a layer by layer until a complex shape or structure is created. You can use different kinds of “ink” or printed material to make your final 3D copy. You can use plastic, alumide, metal, wax, resin or multicolor materials to create your detailed prints.

The material that you will use will determine which printing methods are ideal for you to use. The following are the most commonly used techniques. Take note that all these 3D printers are available in the market. For most large-scale 3D printers, extra care and training are needed to operate and to maintain them. If you are new to 3D printing then a printer with FDM technology may be a good level entry 3D printer for you.

1. For Plastic and Alumide Materials

Plastic and Alumide Materials 3D Printing

Plastic and Alumide Materials 3D Printing

1.1 Fused Deposition Modeling or FDM Technology

This is the most popular printing method and there are a lot of FDM printers available. FDM is affordable and it works by melting the material and forcing the melted material through a nozzle to 3D print a cross-section of an object. The material is placed layer after layer. The bed lowers for each new layer and this process repeats until the printed object is finished. Some FDM printers have two or more print heads to print multiple colors and follow overhanging areas of a complex 3D print. You can order or purchase FDM printers online.

Fused Deposition Modeling or FDM Technology

Fused Deposition Modeling or FDM Technology

1.2 SLS Technology

Laser sintering is another popular 3D printing technique which includes the fabrication of an object by melting layers of powder together to form an object or a design. This is a good technique to print detailed objects and designs and the creation of complex and interlocking forms. Let’s check out FDM vs. SLA here.

2. For Resin or Wax Materials

For Resin or Wax Materials

If you want to use resin or wax, you need techniques that use the technology called photopolymerization. In this technique, the photosensitive resin is solidified by using UV light. Photopolymerisation is used by different 3D printing processes like the following:

2.1 Stereolithography or SLA

In this technique, a vat of curable photopolymer resin is used. The plate descends in small increments as the liquid polymer is exposed to light. The UV laser draws a cross-section one layer after another. The process is repeated until a model is completed.

The object is 3D printed by removing the object from the resin which creates space for the uncured resin at the bottom of the container and can. Then the next layer of the object is formed. Another way is to pull the object down into the tank as the next layer being cured on the top.

2.2 Digital Light Processing or DLP

DLP is a projector used to cure photopolymer resin. This is similar to SLA but instead of using a UV laser to cure the photopolymer resin, a light bulb is used. Objects are created similarly to SLA with the object pulled out of the resin that creates space for the uncured resin inside the container. The next layer is formed and cured at the top.

2.3 Continuous Liquid Interface Production or CLIP

A continuous sequence of UV images created by a digital light projected is used for this technique.  The images are generated by a digital light projected using an oxygen-permeable, UV transparent window under a liquid resin bath. The dead zone above the window maintains a liquid interface. Above the dead zone, the curing part is removed from the resin bath.

Multicolor Material for 3D Printing

Multicolor Material for 3D Printing

3. For Metal Material 3D Printing

DLP and lost-wax casting technique let objects to be printed in 3D. First, a wax model is printed. Then a lost-wax casting technique or a mold is made around the wax before this is melted and filled with silver, thus creating the object.

4. Direct Metal Laser Sintering or DMLS

This uses a laser to sinter metal powder. The laser is used to aiming and trace a cross section of the object one layer at a time. This is similar to the selective laser Sintering technique. This is also a good way to print objects and designs in great detail and create complex and interlocking forms.

Direct Metal Laser Sintering or DMLS for Dentist

Direct Metal Laser Sintering or DMLS for Dentist

5. Electron Beam Melting or EBM

This uses an electron beam as the power source rather than a laser to 3D print metal. An electron beam melts metal powder one layer at a time in a high vacuum environment. This can achieve full melting of the metal powder to create high-density metal parts thus retaining the material’s properties.

3D Printer

6. 3D Printer Selecting

The 3D printer that we recommend to use is Dremel Digilab 3D45 3D Printer that is an award winning 3D printer and it is one of the best 3D printers in 2018 as well. This 3D printer is an idea builder with heated build plate to print Nylon, ECO ABS, PETG, PLA at 50 micron resolution with a high quality standard.

Dremel Digilab 3D45 3D Printer

Dremel Digilab 3D45 3D Printer



How to Use Your 3D Printer – (Tips, Tricks, and Upgrades)